Corona Treater Stations

Solo Systems' corona treater designs are based on proven technology and backed by more than 50 years of scientific study and experience in all aspects of corona treating. All Solo treaters are built with meticulous craftsmanship from the finest corrosion-resistant materials. Standard treater models typically offer the best economy and delivery. We can make bare roll stations as required, or engineer cost-effective custom equipment for unique applications.

Solo Systems will provide major brand power supplies, work with your preferred vendor, or design integrated systems to incorporate existing power units. Each treater is matched to the power supply for operating efficiency and economy.

In every case, Solo Systems equipment and engineering bring you consistent quality and reliable performance. Hundreds of our treaters have been in operation for decades.

At a glance: S600 E-Z Thread

*Great for Narrow Web Blown Film lines * Both sides of the web are treated.
* Easy drop through threading.


S600 - E - Z Thread

PROVEN TECHNOLOGY
The S600 E-Z Thread extends corona treating technology to narrow-web applications, so you can count on consistent high treat levels and a cleaner, safer treat process. Fully enclosed and properly vented, the S600 E-Z Thread exhausts ozone to help you clean up the workplace. S600 E-Z Thread treaters come equipped with Solo Systems' more efficient electrodes, cool running rollers and E-3 epoxy treater roll coatings.
PERFORMANCE FEATURES
S600 E-Z Thread treaters have the features you need for operating efficiency. S600 E-Z Thread enclosures are safety interlocked. The zero speed switch cuts treater power automatically if the line stops. This safeguards the equipment and the web. Electrode segments adjust in 1/2" or 1" increments to match web width for job-by-job flexibility. With drop through threading and automatic indexing, the S600 E-Z Thread gets your line back in motion fast.
QUALITY
All Solo Systems' brand corona treaters are built to last. With corrosion resistant materials, stainless steel hardware and careful construction, you can expect years of trouble-free corona treating, minimal maintenance and maximum productivity from your line.
INNOVATIVE DESIGN
All S600 E-Z Thread treaters accommodate 4", 6" or 8" diameter rolls. You can order your S600 E-Z Thread with 4" or 6" rolls to meet your current requirements and minimize initial cost. Then upgrade to 8" diameter rolls - and more treat power- when your line conditions change or line speeds increase. The retrofit options give you flexibility to protect your equipment investment. Retrofit option is also available in 10"/12" diameter rolls.
SIMPLE INSTALLATION
S600 E-Z Thread treaters are completely pre-wired internally with ready hookups for air and electric. Mounting brackets are pre-drilled for your installation site or portable equipment cart. Portable equipment carts are also available for purchase to fit your new or existing treater. S600 E-Z Thread treaters are light-weight and compact for easy installation on new or existing lines. Our S600 series comes in a variety of sizes from 4" diameter rolls to 24" diameter rolls. The E-Z Thread system treats both sides of the web. It is designed for easy threading of the web by having a pneumatic roll cage that retracts for drop-through threading. This station is ideal for general or mixed use blown film lines.

Standard Features include:
Corrosion resistant aluminum enclosure
Drop-through threading
Automatic indexing
Input and Output idler rolls
Electrodes adjustable in 1/2" or 1" increments
Electrodes matched to your power supply
Enclosed electrical and pneumatic assemblies
 Stainless steel hardware
Sealed bearings
Safety/door interlocks
Zero speed switches
Pre-wired internally
Exhaust duct built in
Mounting brackets pre-drilled

Order Here

At a glance: S1000 Front Access

Great for Limited Space * Both sides of the web are treated. * All access through front side


S1000 Front Access 

FOOTPRINT
The S1000FA series stations are narrow front to back with all access through full width front doors. Operators have ample clearance for manual thread-up, treat width adjustment and gapping of both electrodes - all from the front of the station.
WRAP
The film wraps the treater rolls 180 degrees. Maximum wrap allows lower film tension levels to maintain positive roll rotation. In some applications, the extra wrap may eliminate the need for external drive.
MECHANICS
Pneumatic cylinders, pivot mechanisms, relays, and air lines are located outboard of the frames. This helps isolate them from corrosive ozone and provides convenient access for maintenance.
VENTILATION
The S1000FA provides good, directed ventilation to remove ozone, cool the treater rolls and pull away volatiles that are flashed off the film during the treat process. Film entry and exit slots are kept narrow by counterweighted, swing away panels. These panels allow start-up knots to pass through the station and then swing back to position for correct air infiltration. An exhaust duct is provided to connect to your plant exhaust system. Properly installed and vented, the unit has a strong downdraft air path designed to minimize residue accumulation and cleaning requirements. S1000FA series treaters are compatible with various power levels and line conditions. The S1000FA can be bolted directly to the primary or secondary nip assembly to minimize floor space requirements and provide a belt drive connection near the nip roll itself.

The S1000FA small footprint and convenient front access make it a logical choice for film extruders with limited tower mezzanine space and access. This station is ideal for bag lines or high speed blown film lines.

Standard Features include:
Corrosion resistant aluminum enclosure
Automatic indexing
Input and Output idler rolls
Electrodes adjustable in 1/2" or 1" increments
Electrodes matched to your power supply
Enclosed electrical and pneumatic assemblies
Stainless steel hardware
Sealed bearings
Safety/door interlocks
 Zero speed switches
Pre-wired internally
Exhaust duct built in
Mounting brackets pre-drilled

Order Here

At a glance: S500 Drop Thru Thread

*Great for all types Blown Film lines *One side of the web is treated.
* Easy drop through threading.


S500 Drop Thru Thread 

OUR NEWEST TREATER
The S500 Drop Thru Thread extends the same gravity assisted threading as the S600 E-Z Thread treater to single side treat process. Fully enclosed and properly vented, the S500 Drop Thru Thread exhausts ozone to maintain a safe workplace. S500 Drop Thru Thread treaters come equipped with Solo Systems' efficient aluminum electrode, a cool running roller and E-3 epoxy treater roll coating - proven in the field for 50 years.
PERFORMANCE FEATURES
S500 Drop Thru Thread treaters have the features you need for operating efficiency. S500 Drop Thru Thread enclosures are safety interlocked. The zero speed switch cuts treater power automatically if the line stops. This safeguards the equipment and the web. Electrode segments adjust in 1/2" or 1" increments to match web width for job-by-job flexibility. With drop through threading and automatic indexing, the S500 Drop Thru Thread gets your line back in motion fast.
QUALITY
All Solo Systems' brand corona treaters are built to last. With corrosion resistant materials, stainless steel hardware and careful construction, you can expect years of trouble- free corona treating, minimal maintenance and maximum productivity from your line.
INNOVATIVE DESIGN
All S500 Drop Thru Thread can support up to a 24" treater roll. This treater gives you the easy of the 2 -side E-Z Thread for a 1 -side treat application. Two S500 Drop Thru Thread treaters mounted back to back make a convenient, low cost system to treat the inside of a split web.
SIMPLE INSTALLATION
S500 Drop Thru Thread treaters are completely pre-wired internally with ready hookups for shop air and control power from your power supply. Mounting brackets are pre-drilled for your installation site or portable equipment cart. Portable equipment carts are also available for purchase to fit your new or existing treater. S500 Drop Thru Thread treaters are light-weight and compact for easy installation on new or existing lines. Our S500 series comes in a variety of sizes from 4" diameter rolls to 24" diameter rolls. The Drop Thru threading system treats one side of the web. It is designed for easy threading of the web by having a pneumatic roll cage that retracts for drop-through threading. This station is ideal for general or mixed use blown film lines.

Standard features include:
Corrosion resistant aluminum enclosure
Drop-through threading
Automatic indexing
Input and Output idler rolls
Electrode adjustable in 1/2" or 1" increments
Electrode matched to your power supply
Enclosed electrical and pneumatic assemblies
Stainless steel hardware
Sealed bearings
Safety/door interlocks
Zero speed switch
Pre-wired internally
Exhaust duct built in
Mounting brackets pre-drilled

Order Here

At a glance: S900 Wide Format

*Great for Wide Format Blown Film lines * One side of the web is treated.
* Best option for lumber wraps or carpet products, etc.


S900 Wide Format

QUALITY
All Solo Systems' brand corona treaters are built to last. With corrosion resistant materials, stainless steel hardware and careful construction, you can expect years of trouble-free corona treating, minimal maintenance and maximum productivity from your line.
PERFORMANCE FEATURES

S900 have been formatted for very wide web treating. Though the S900 also comes in shorter versions,
it is really a power horse for larger webs.
VENTILATION
Film entry and exit slots are kept narrow by counterweighted, swing away panels. These panels allow start-up knots to pass through the station and then swing back to position for correct air infiltration. An exhaust duct(s) is provided to connect to your plant exhaust system.
SIMPLE INSTALLATION
S900 treaters are completely pre-wired internally with ready hookups for air and electric. Mounting brackets are pre-drilled for your installation site or portable equipment cart. Portable equipment carts are also available for purchase to fit your new or existing treater. Our S900 series treaters come in sizes from a 6" diameter roll to a 24" diameter roll. This system treats one side of the web. Station can be made for either top-side treating only or bottom-side treating only.
*Important: Please specify top-side or bottom-side treating at time of order placement.

Standard Features include:
Electrodes adjustable in 1/2" or 1" increments
Electrodes matched to your power supply
Enclosed electrical and pneumatic assemblies
Stainless steel hardware
Sealed bearings
Safety/door interlocks
Zero speed switch
Pre-wired internally
Exhaust duct built in
Mounting brackets pre-drilled
Optional features are available

Order here